Cyclone 2012 New Release Installer
=====================
Installer v1.20
30.04.2012
=====================
- New Loaders v11.50.00 added
- MEP-40488-004 added
- Xgold113 (Dual-sim) RPL write support added
- New Product - Cyclone Box Reloaded support added
- Project completly refactorized from scratch. Compiler changed from obsolete Delphi7 to Delphi2007. Just because of this, lots of stability and speed improvment gained.
- "News" added in main window
- No need anymore to tick "Old USB flashing method" manually, it's detected automatically
- "New Downgrade" BB5 method added (tick in before-flash tasks)
- When Windows 7 is detected, software is not hidden to tray
- Added Windows 7 interactive progressbar when minimized to tray. When software is minimized, you will notice status of current job: green progressbar - working, red progressbar - error, yellow-paused, etc
- Boot recovery added for all boxes during box wizard
- Bootloader reverted to v2.13 (temporary solution, v3.01 will get back soon)
- Automatic smartcard refill when empty addded
- Added COD->NCK verification upon data generation
- After COD->NCK calculation, NCK codes are automatically stored inside COD file
- New Paths is now addded to default Flash Path Search table (C:\Users\xxxx\AppData... etc)
- Windows7 Permission issues fixed (needed "Run as admin" to work properly with autoupdate)
- Software is redesigned now. To gain full funcionality YOU DON'T NEED run as "Admin". This means you can be ensured about our software quality and security - no hidden trojans (as happened before with other products).
- Box wizard Added; this is all-in-one tool which will: repair, upgrade, activate, register, bootloader recovery, smartcard refill, bootloader upgrade, etc your box. Just one click.
- Box Registration module removed
- Box Maintenance module removed
- Card Maintenance module removed
- The paths is now updated on each sw startup
- Fixed Windows7 Save Paths/Settings problem
- BB5 loader problems when skin enbled (ROM refused...etc)
- Access violation on exit fixed
- Splash updated
- CBUS Lost Handle Fixed
- Only one copy of Cyclone Box application can be launched now, this improves stability
- NCK Code Sending fixed for SIMLOC30 phones (0x01 error)
- Fixed tray issues
- Autoupdate code is now checking for installed installer, if obsolete then asks for download latest version
- Improved RPL backup in USB mode (Custom Loader didn't reset phone to FlashMode, and some backups did containt Superdongle/Simlock data only)
- XGold/Blackberry Service "Credits" renamed to "Counter" (because it is a counter, not real fee-credits), as it puts too much confussion
- "Join us on Facebook" added at main software
- "cyclonebox.dll not found" message when no drivers installed changed to suitable messagebox asking to connect your box first time and install drivers
- "security problem #1" solved on those who copied cyclonebox.dll before
- Fixed interrupted auto-update problems (after restart - this is not valid Win32 application)
- FastMM v4.99 Introduced
- Skin Stack Updated to v7.62
- libeay/ssleay libraries updated to latest one, much more fast and stable
- Minor changes and bugfixes
download:
http://www.karwos.hk/CycloneBoxInstallerNew.exe
Installer v1.20
30.04.2012
=====================
- New Loaders v11.50.00 added
- MEP-40488-004 added
- Xgold113 (Dual-sim) RPL write support added
- New Product - Cyclone Box Reloaded support added
- Project completly refactorized from scratch. Compiler changed from obsolete Delphi7 to Delphi2007. Just because of this, lots of stability and speed improvment gained.
- "News" added in main window
- No need anymore to tick "Old USB flashing method" manually, it's detected automatically
- "New Downgrade" BB5 method added (tick in before-flash tasks)
- When Windows 7 is detected, software is not hidden to tray
- Added Windows 7 interactive progressbar when minimized to tray. When software is minimized, you will notice status of current job: green progressbar - working, red progressbar - error, yellow-paused, etc
- Boot recovery added for all boxes during box wizard
- Bootloader reverted to v2.13 (temporary solution, v3.01 will get back soon)
- Automatic smartcard refill when empty addded
- Added COD->NCK verification upon data generation
- After COD->NCK calculation, NCK codes are automatically stored inside COD file
- New Paths is now addded to default Flash Path Search table (C:\Users\xxxx\AppData... etc)
- Windows7 Permission issues fixed (needed "Run as admin" to work properly with autoupdate)
- Software is redesigned now. To gain full funcionality YOU DON'T NEED run as "Admin". This means you can be ensured about our software quality and security - no hidden trojans (as happened before with other products).
- Box wizard Added; this is all-in-one tool which will: repair, upgrade, activate, register, bootloader recovery, smartcard refill, bootloader upgrade, etc your box. Just one click.
- Box Registration module removed
- Box Maintenance module removed
- Card Maintenance module removed
- The paths is now updated on each sw startup
- Fixed Windows7 Save Paths/Settings problem
- BB5 loader problems when skin enbled (ROM refused...etc)
- Access violation on exit fixed
- Splash updated
- CBUS Lost Handle Fixed
- Only one copy of Cyclone Box application can be launched now, this improves stability
- NCK Code Sending fixed for SIMLOC30 phones (0x01 error)
- Fixed tray issues
- Autoupdate code is now checking for installed installer, if obsolete then asks for download latest version
- Improved RPL backup in USB mode (Custom Loader didn't reset phone to FlashMode, and some backups did containt Superdongle/Simlock data only)
- XGold/Blackberry Service "Credits" renamed to "Counter" (because it is a counter, not real fee-credits), as it puts too much confussion
- "Join us on Facebook" added at main software
- "cyclonebox.dll not found" message when no drivers installed changed to suitable messagebox asking to connect your box first time and install drivers
- "security problem #1" solved on those who copied cyclonebox.dll before
- Fixed interrupted auto-update problems (after restart - this is not valid Win32 application)
- FastMM v4.99 Introduced
- Skin Stack Updated to v7.62
- libeay/ssleay libraries updated to latest one, much more fast and stable
- Minor changes and bugfixes
download:
http://www.karwos.hk/CycloneBoxInstallerNew.exe
.jpg)
0 Komentar